AML M3000 Uživatelská příručka stáhnout pdf (Strana 27)

M5000 Portable Data Terminal American Microsystems, Ltd.

Comm. Setup

Refer to Communications Setup in the previous section.

Laser/CCD Options

Mode

—

select one of the following options by using the left or right arrow:

Trigger



a trigger pull activates the laser that remains on until the trigger is released, a valid

decode occurs or a laser/CCD timeout is reached. (default)

Pulse



a trigger pull activates the laser that remains on until a valid decode occurs or a

laser/CCD timeout is reached.

Continuous



a trigger pull activates the laser that remains on while the trigger is pressed or a

valid decode occurs before the

laser/CCD timeout is reached.

Blink



a trigger pull activates the laser that remains on for a period equal to the laser/CCD

timeout after a valid decode occurs. The laser blinks 250ms on and 250ms off. Blink mode does

not operate properly for lasers that employ thermal shutdown.

Timeout

if the laser or CCD does not read a bar code within the designated time period,

the device turns off. Select off or a 1-9 second delay. (If the option is set to off, it overrides this

safety feature.) (The default is a three-second timeout.)

Read Delay

—

this option sets the delay period between successive reads of the same bar

code. This allows the removal of the bar code from the scan field without multiple reads. Select

one of the following options:

0.0 (no delay) – 9.9 seconds (incremented in tenths of a second)

1.0 second (default)

Other Options

Bar Code ID

—

transmits the bar code identifier character at the beginning of the bar code

data. A space is included between the ID character and the bar code data. Choose Off or On to

activate this option. Default is set to On.

Duplicate Reads

—

enables reading the same bar code multiple times. (Default is set to

on.)

Read Verify #

—value from 0 to 9 denoting number of rereads of same bar code before

accepting it as valid data. (Default is 0.)

F1—F10 Keys

—

enables reading of function keys in place of ASCII characters. (Default

is set to on.)

Special Keys

—

enables reading of special keys in place of ASCII characters. (Default is

set to on.)

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 37 38

Komentáře k této Příručce

Žádné komentáře

AML M3000 Uživatelská příručka Strana 27

Komentáře k této Příručce

Související produkty a manuály pro Čtečky čárových kódů AML M3000